Back to Top

Products

Meshgen

screen shot of Meshgen

The program consists of two standard modules, the Geometry Modeller and the FE-mesh Generator, and several other customizable modules for pre- and post-processing data (defining domain properties, boundary conditions and graphical display of results).

MESHGEN Plus has been used as a base library for the development of HYDRUS 2D/3D. Currently we are finishing a new version of MESHGEN Plus that can be used either as a stand-alone application (for preparing data for other FEM programs - see Meshgen Area 2011) or for the rapid development of new FEA programs.

Trillium Borehole Broadband

Trillium Borehole Broadband Seismometer

The Trillium Borehole Seismometer is a very broadband seismometer designed for cased borehole deployments. The instrument is housed in a stainless steel enclosure incorporating a hole-lock mechanism to allow the instrument to be coupled to a deep borehole casing. Instrument recovery is aided by a fail-safe holelock release mechanism that prevents jamming to the casement during removal.

An advanced levelling system allows the unit to operate over a tilt range of +/-5 degrees. The axis stack is mechanically levelled to ensure that the vertical axis does not couple horizontal noise.

One Piece Soil Sampler, 3ft Steel Chrome

One Piece Soil Sampler, 3ft Steel Chrome

The NEW Lord Soil Sampler is 38" (0.97 m) in overall length with a 1" (2.5cm) shaft X 1.310" (3.3 cm) handle plus handle grips. The "T" handle assembly is made of rugged and welded aluminum tubing and the one foot sample inspection and removal portion, which is now replaceable, is made of tough chrome molly tubing with a black oxide finish. The replaceable cutting tip is made of unfinished but heat treated stainless steel. The unit is also marked in 6" (15.2cm) increments to assure you are at the desired depth while sampling.

Transmitter- VIP 4000 Induced Polarisation (IP)

VIP 4000 Induced Polarisation (IP) Transmitters

A back-lighted liquid crystal alphanumeric display is provided for the simultaneous indication of all output parameters. Output current, output voltage, contact resistance and output power are continuously displayed.

Spectrometer- RS-120 Super-SCINT

RS 120 Handheld Radiation Detector

The new RS-120 Spectrometer is the state-of-the art in portable hand-held radiation survey search devices for the geophysical industry. It offers an integrated design with a large detector, direct Survey readout, Scan mode, data storage, full weather protection, ease of use and highest sensitivity in the market.

Total count display on front panel in cps at 1/sec update rate. Loud linear audio permitting eyes-free operation. USB earphone support for noisy area surveying.

Minitrase kit with bluetooth & android

Minitrase kit with bluetooth & android

The MiniTrase uses Time Domain Reflectometry (TDR) to measure instantaneously the volumetric water content of soils and other moist media. A variety of connectors and waveguides for depth measurements ranging from 15 cm to 70 cm are available, and can be used in a portable manner or permanently installed for periodic moisture monitoring. The volumetric moisture content is displayed on the Android tablet, and the graph of the TDR pulse can also be tagged for identification and stored for later viewing and analysis on the tablet or a PC.

Electromagnetic- VLF System - EM16

Electromagnetic- VLF System - EM16

The EM16 VLF Receiver is the most widely used electromagnetic geophysical instrument of all time. Local tilt and ellipticity of VLF broadcasts are measured and resolved into inphase and quadrature components of VLF response. The EM16 has discovered several base and precious-metal ore bodies and many water-bearing fractures and faults.The EM16R Resistivity Attachment uses a pair of electrodes to measure the apparent resistivity of the earth. The combined EM16/16R instrument can detect a second earth layer if the layer occurs within the VLF skin-depth.

Pages