Back to Top


Gravity Meter- MGS-6

MGS-6 Gravity Meter

Micro-g LaCoste is proud to announce the next generation of marine based dynamic gravity meters: The Marine Gravity System-6 (MGS-6). It represents the next generation in a long line of LaCoste-based dynamic gravity systems, stretching back to the first successful dynamic gravity meter tests on ships more than 50 years ago. Note though, that the MGS-6 is more than a simple upgrade to the Air-Sea System II (AS-2). The MGS-6 is based on the smaller, lighter, more power-efficient TAGS-6 (airborne) platform, and employs the same full-force feedback sensor.

Seismometer- Geode DZ, 3D Seismic System

Geode DZ, 3D Seismic System

The Geode DZ 3D seismic system from Geometrics is the result of over 30 years of experience in building seismographs that have been used all over the world for an amazingly broad range of survey types. The knowledge we have gained over the years has allowed us to provide you with the Geode DZ - a reliable, low entry cost, easy to use 3D seismic system.The Geode DZ uses the same proven, reliable technology that has always been employed in the Geode system – well known for its reliability and ruggedness.

Spectrometer- RS-125 Super-SPEC

RS-125 Super-SPEC Radiation detector

The new RS-125 Spectrometer is the state-of-the art in portable hand-held radiation survey search devices for the geophysical industry. It offers an integrated design with a large detector, direct Assay readout, data storage, full weather protection, ease of use and highest sensitivity in the market.

Total count display on front panel in cps at 1/sec update rate. Loud linear audio permitting eyes-free operation. USB earphone support for noisy area surveying.

Metal Detectors

Metal Detectors

Geonics Metal Detectors are high power, high sensitivity metal detectors suitable for applications in the detection of both ferrous and non-ferrous metal. Insensitive to common sources of both geologic and cultural noise, Metal Detectors can be operated without compromise to data quality in most survey environments.

Common applications, in several fields of geophysical practice, include the detection of environmental hazards (e.g. drums, underground storage tanks (USTs)); utilities and infrastructure; construction and industrial waste; and unexploded ordnance (UXO).

Electromagnetic- VLF System - EM16

Electromagnetic- VLF System - EM16

The EM16 VLF Receiver is the most widely used electromagnetic geophysical instrument of all time. Local tilt and ellipticity of VLF broadcasts are measured and resolved into inphase and quadrature components of VLF response. The EM16 has discovered several base and precious-metal ore bodies and many water-bearing fractures and faults.The EM16R Resistivity Attachment uses a pair of electrodes to measure the apparent resistivity of the earth. The combined EM16/16R instrument can detect a second earth layer if the layer occurs within the VLF skin-depth.

Winch- Series - 4WNA

Series Winch - 4WNA

The Mount Sopris WNA Truck-Mounted Winch is a rugged logging hoist capable of positioning a geophysical probe or other tool in a borehole. The winch is designed to be mounted to a truck, and can haul equipment loads up to 600 lbs at rates between 25 and 90 ft/min. The WNA is optimal for boreholes between 1000 and 1800 meters in depth and supports a wide variety of wire line types.

Borehole Probes- EM39 Conductivity

Borehole Probes - EM39 Conductivity

Borehole geophysics provides a means of evaluating various properties of subsurface rocks, soils and fluids. Probes measuring various, specific properties are lowered into boreholes collecting either continuous or point data.