Back to Top

Geological

Logging System- Oil & Gas Applications

Loggers for Oil & Gas Applications

Mount Sopris geophysical logging systems can be used to help estimate reservior thickness, porosity and permeability. We manufacture a family of geophysical logging tools that can be custom-stacked for a particular exploration and / or production project. The QL (Quick-Link) geophysical logging tools will reduce your time on site, and the 40mm nominal diameter and compact, easy-to-connect or stack is designed to get down tight boreholes.

Seismometer- Geode DZ, 3D Seismic System

Geode DZ, 3D Seismic System

The Geode DZ 3D seismic system from Geometrics is the result of over 30 years of experience in building seismographs that have been used all over the world for an amazingly broad range of survey types. The knowledge we have gained over the years has allowed us to provide you with the Geode DZ - a reliable, low entry cost, easy to use 3D seismic system.The Geode DZ uses the same proven, reliable technology that has always been employed in the Geode system – well known for its reliability and ruggedness.

Magnetometer- Mobile Cesium G-824 Suprema-C

Mobile Cesium Magnetometer G-824 Suprema-C

Geometrics introduces the new G-824A Suprema-C Cesium Vapor magnetometer with an ultra-high sensitivity of 350 fT/√Hz RMS sensitivity and ultra high sample rates up to 1000 Hz.

Magnetometer- Land G-856

Land Magnetometer G-856

The G-­856 provides a reliable, low cost solution for a variety of magnetic search and mapping applications. Single key stroke operation means the G-­856AX can be operated by non-technical field personnel or used in teaching environments. The G-­856AX uses the well proven proton precession technology, allowing accurate measurements to be made with virtually no dependence upon variables such as sensor orientation, temperature, or location. The unit provides a repeatable absolute total field magnetic reading, traceable to the National Bureau of Standards.

Gravity Meter- CG-5 Autograv

CG-5 Autograv Gravity Meter

The CG-5 AUTOGRAV has a standard resolution of 1 microGal with a standard deviation that is < 5 microGals. It is the fastest, lightest, most cost efficient gravity meter on the market today.

With minimal training a user can quickly collect and record reliable gravity data.

Field repeatability tests are the best measure of a gravity meter’s performance. Documented field tests of the CG-5 AUTOGRAV meters show a standard deviation between individual readings and station values of better than 5 microGals.

Spectrometer- RS-230 BGO Super-SPEC

RS-230 BGO Super-Spec radiation detector

The RS-230 Spectrometer is the state-of-the art in portable hand-held radiation survey search devices for the geophysical industry. It offers an integrated design with a large detector, direct Assay readout, data storage, full weather protection, ease of use and highest sensitivity in the market. The use of a BGO give very significant increase in performance over the normal NaI detector (typically 3x).

Spectrometer- RS-125 Super-SPEC

RS-125 Super-SPEC Radiation detector

The new RS-125 Spectrometer is the state-of-the art in portable hand-held radiation survey search devices for the geophysical industry. It offers an integrated design with a large detector, direct Assay readout, data storage, full weather protection, ease of use and highest sensitivity in the market.

Total count display on front panel in cps at 1/sec update rate. Loud linear audio permitting eyes-free operation. USB earphone support for noisy area surveying.

SYSCAL R2

The SYSCAL R2 unit is a high-power system designed for DC electrical surveys applied to groundwater exploration, environmental studies, civil engineering, structural geology investigation and mineral exploration. Powerful: The SYSCAL R2 uses an external DC source for energizing the ground (800 V maximum output voltage):

  • 250 W DC/DC converter supplied by a 12V battery
  • 1200 W AC/DC converter supplied by a standard motor generator

Automatic: The SYSCAL R2 is controlled by a microprocessor for:

Resistivity Imaging- SYSCAL R1 Plus

SYSCAL R1 Plus resistivity meter for medium-depth exploration. Compact, easy to use. Measurement of electrical resistivity & charge-ability (IP). 2 simultaneous reception channels, Outputs: 600V/1200Vp-p-200W-2,5A

Resistivity Meter for Medium-Depth Exploration

• Compact, easy to use 
• Measurement of electrical resistivity & changeability (IP) 
• 2 simultaneous reception channels 
• Outputs: 600V/1200Vp-p-200W-2.5A 

Resistivity Imaging- SYSCAL Kid

SYSCAL Kid resistivity meter for archeology and engineering. Automatic ranging, direct resistivity reading, built in data logging, field proof.

A very compact unit, specially designed for shallow electric surveys. The SYSCAL Kid offers the well-known reliability and measurement accuracy of the entire SYSCAL range of resistivity meters.

Easy to use, field proof and light weight, SYSCAL Kid is ideal for archaeological, geological mapping and civil engineering applications.

Pages