Back to Top

Products

Receiver- ELREC Pro Induced Polarisation (IP)

ELREC Pro Induced Polarisation (IP) Receivers

ELREC Pro: this new receiver is a new compact and low consumption unit designed for high productivity Resistivity and Induced Polarization measurements. It features some high capabilities allowing to work in any field conditions.

Reception dipoles: the ten dipoles of the ELREC Pro offer an high productivity in the field for dipole-dipole, gradient or extended poly-pole arrays.

Antenna- 400 MHz Shielded

400 MHz Shielded Antenna

The 400 MHz is ideally suited for detection and mapping of utility pipes, as well as shallow engineering and environmental applications.

Features of 400 MHz Shielded Antenna

  • Center Frequency: 400 MHz
  • Depth Range: 0-4 m (0-12 ft)
  • Weight: 5 kg (11 lbs)
  • Dimensions: 30x30x17 cm (12x12x6.5 in)

Seismometer- Geode DZ, 3D Seismic System

Geode DZ, 3D Seismic System

The Geode DZ 3D seismic system from Geometrics is the result of over 30 years of experience in building seismographs that have been used all over the world for an amazingly broad range of survey types. The knowledge we have gained over the years has allowed us to provide you with the Geode DZ - a reliable, low entry cost, easy to use 3D seismic system.The Geode DZ uses the same proven, reliable technology that has always been employed in the Geode system – well known for its reliability and ruggedness.

Pencil Tensiometer, 12in

Pencil Tensiometer, 12in

Thin Tensiometer, 12" (30 cm) length; 3/8" (1 cm) diameter.

Data Acquisition- DAS70-AR System

Data Acquisition System DAS70-AR

Data acquisition systems support the collection and processing of data from Ground Conductivity Meters and Metal Detectors. Every data acquisition system includes all required components for data collection and processing including: a data acquisition unit; separate cables for data collection and data transfer; and software appropriate for both data collection and processing.All data acquisition systems require a digital input signal.

Gravity Meter- MGS-6

MGS-6 Gravity Meter

Micro-g LaCoste is proud to announce the next generation of marine based dynamic gravity meters: The Marine Gravity System-6 (MGS-6). It represents the next generation in a long line of LaCoste-based dynamic gravity systems, stretching back to the first successful dynamic gravity meter tests on ships more than 50 years ago. Note though, that the MGS-6 is more than a simple upgrade to the Air-Sea System II (AS-2). The MGS-6 is based on the smaller, lighter, more power-efficient TAGS-6 (airborne) platform, and employs the same full-force feedback sensor.

Rect

These hydraulic properties are key parameters in any quantitative description of water flow into and through the unsaturated zone of soils. The program uses the parametric models of Brooks-Corey (1964), van Genuchten (1990), the lognormal distribution model of Kosugi (1996), and the dual-permeability model of Durner (1994)

Pages