Back to Top

Products

Metal Detectors

Metal Detectors

Geonics Metal Detectors are high power, high sensitivity metal detectors suitable for applications in the detection of both ferrous and non-ferrous metal. Insensitive to common sources of both geologic and cultural noise, Metal Detectors can be operated without compromise to data quality in most survey environments.

Common applications, in several fields of geophysical practice, include the detection of environmental hazards (e.g. drums, underground storage tanks (USTs)); utilities and infrastructure; construction and industrial waste; and unexploded ordnance (UXO).

Spectrometer- Drager-based Fluxmeter

Drager-based Fluxmeter

The WEST Systems Fluxmeter is a portable instrument for the measurement of diffuse degassing phenomena, based on the accumulation chamber method, suitable for volcanic and geothermal areas as well as soil respiration rate in agronomy.

Gravity Meter- MGS-6

MGS-6 Gravity Meter

Micro-g LaCoste is proud to announce the next generation of marine based dynamic gravity meters: The Marine Gravity System-6 (MGS-6). It represents the next generation in a long line of LaCoste-based dynamic gravity systems, stretching back to the first successful dynamic gravity meter tests on ships more than 50 years ago. Note though, that the MGS-6 is more than a simple upgrade to the Air-Sea System II (AS-2). The MGS-6 is based on the smaller, lighter, more power-efficient TAGS-6 (airborne) platform, and employs the same full-force feedback sensor.

SYSCAL Junior Switch 72

The SYSCAL JUNIOR Switch-72 is an all-in-one multinode resistivity imaging system. It features an internal switching board for 72 electrodes and an internal 200W power source. The output current is automatically adjusted (automatic ranging) to optimise the input voltage values and ensure the best measurement quality. The system is designed to automatically perform pre-defined sets of resistivity measurements with roll-along capability. In the 5 m version, four multi-core cables with 18 electrodes takeout each are connected on the back of the resistivity meter.

Software- AquiferTest Pro

AquiferTest Pro

Advanced Pumping Test and Slug Test Data Analysis Software With the ability to characterize your aquifer and analyze pumping and slug tests, AquiferTest Pro features all of the tools you need in one convenient groundwater data analysis program. Aquifertest pro represents a major leap forward in pumping test analysis technology. With the integration of derivative analysis capabilities, trends corrections, and data contouring, you will have the tools to analyze and report your pumping test data like never before!

Soil Coil Sampler 2 1/4in

Soil Coil Sampler 2 1/4in

The 0200 Soil Core Sampler allows the extraction of intact soil cores. This is a "undisturbed" type soil sampler. A core 2-1/4" (5.7 cm) in diameter is extracted and held in a brass cylinder. The cylinder and soil sample can then be placed in a pressure plate extractor or Tempe cell apparatus, and the water-holding characteristics of the sample can be determined. The cylinder can be used to provide a sample of known volume, allowing the bulk density to be determined.

Auger Kit, Heterogeneous Soils Conical, up to 5M

Auger Kit, Heterogeneous Soils Conical, up to 5M

Auger set for heterogeneous soils. Includes 4 types of Dutch augers (clay-, sand-, coarse sand and combination type), Bucket auger, a stony soil auger, a spiral auger, a piston sampler and a gouge auger. Conical Thread Connection, for sampling up to 5 meters depth. In aluminum transport case.

Pages