Back to Top

Geosciences & Engineering

Ground Conductivity Meter- EM31

Ground Conductivity Meter EM31

EM31-MK2

The EM31-MK2 maps geologic variations, groundwater contaminants, or any subsurface feature associated with changes in ground conductivity. Using a patented electromagnetic inductive technique that allows measurements without electrodes or ground contact. With this inductive method, surveys can be carried out under most geologic conditions including those of high surface resistivity such as sand, gravel, and asphalt.

Ground Conductivity Meter- EM38

Ground Conductivity Meter EM38

The EM38-MK2 provides measurement of both the quad-phase (conductivity) and in-phase (magnetic susceptibility) components within two distinct depth ranges, all simultaneously, without any requirement for soil-to-instrument contact.

StructureScan Mini HR

StructureScan Mini HR

The StructureScan™ Mini HR is GSSI’s all-in-one high-resolution GPR system for concrete inspection. With a 2600 MHz antenna, this handheld system locates rebar, conduits and post-tension cables in depths of up to 16 inches (40 cm).The StructureScan Mini HR is available in two models; 2D, for real-time target location and 3D, for an x-ray like image. Ideal for complex areas, the StructureScan Mini HR can delineate small targets with superior vertical and horizontal resolution.Typical uses for StructureScan Mini HR include:

RoadScan 30

RoadScan 30

The affordable RoadScan™ 30 system provides users with an effective tool for quickly determining pavement layer thickness. RoadScan is able to collect data densities not obtainable using other labor-intensive methods. RoadScan data can be acquired at highway speeds, which eliminates the need for lane closures and provides a safer working environment.The RoadScan system is available in 1-4 channels for job site flexibility.Typical Uses for RoadScan Include:

UtilityScan LT

UtilityScan LT

UtilityScan™ LT is a lower cost ground penetrating radar solution based on the industry standard UtilityScan. The UtilityScan LT is purpose-built and easy to use, and allows users to quickly identify the location and depth of underground utilities in real- time.The UtilityScan LT retains the exceptional data quality and rugged construction of the UtilityScan family, and is the perfect entry-level utility locating system.Typical Uses for UtilityScan Include:

Metal Detector- EM61

Metal Detector EM61

The EM61-MK2A is a high sensitivity, high resolution, time domain metal detector suitable for the detection of both ferrous and non-ferrous metal. Typical target response is a single, sharply defined peak, facilitating quick and accurate determination of location. Achievable depth of detection will depend on several target characteristics, with the surface area and orientation of the target of particular importance.

Antenna- 2600 MHz High Resolution Concrete

2600 MHz High Resolution Concrete Antenna

The new 2600 MHz is an ultra-high resolution antenna used to inspect concrete structures to locate embedded rebar, post tension cables and conduits.

  • Center Frequency: 2600 MHz
  • Depth Range: 0-0.4 m (0-12 in)
  • Weight: 1.8 kg (4 lbs)
  • Dimensions: 3.8x10.16.5 cm (1.5x4x6.5 in)
  • Model 52600S

Antenna- 270 MHz Shielded

270 MHz Shielded Antenna

The 270 MHz is ideally suited for detection and mapping of utility pipes, as well as shallow engineering and environmental applications.

  • Center Frequency: 270 MHz
  • Depth Range: 0-6 m (0-18 ft)
  • Weight: 8.6 kg (18.5 lbs)
  • Dimensions: 45x45x17 cm (18x18x6.5 in)
  • Model 50270S

Antenna- 900 MHz Shielded

900 MHz Shielded Antenna

The 900 MHz antenna is designed for applications requiring shallow penetration down to 1 m (3 ft.), including void detection, concrete thickness assessment and shallow pipe location. It can also be used for location of rebar where space is not limited

  • Center Frequency: 900 MHz
  • Depth Range: 0-1 m (0-3 ft)
  • Weight: 2.3 kg (5 lbs)
  • Dimensions: 33x18x8 cm (13x7x3 in)
  • Model 3101D (U.S. and Canada), 3101A (International)

Antenna- 200 MHz Shielded

200 MHz - Shielded Antenna

The 200 MHz can penetrate to a depth of 9 meters (30 feet), making it ideally suited for geotechnical and environmental applications, as well as archaeological investigations.

  • Center Frequency: 200 MHz
  • Depth Range: 0-9 m (0-30 ft)
  • Weight: 20.5 kg (45 lbs)
  • Dimensions: 60x60x30 cm (24x24x12 in)
  • Model 5106 (U.S. and Canada) Model 5106A (International)

Pages