Back to Top

Environmental Monitoring

Tensiometers 2100F without gauge

Tensiometers 2100F without gauge

2100F Soilmoisture Probe is a specialized unit designed for investigation of soil suction in small regimes such as near the soil surface, or for laboratory work such as measuring soil suction values at various levels in soil columns. The porous ceramic cup is 0.25" (6 mm) in diameter and 1" (2.5 cm) long and attaches to the tensiometer body via a 6 ft. (1.8 m) length of nylon tubing. Unit supplied without Gauge.

Root Auger Drilling Crown

Root Auger Drilling Crown

The Model 092K1-002 Replaceable Drilling Crown for 0192K1 Root Auger.

Ergonomic Auger Kit, Heterogenous Soils up to 5M

Ergonomic Auger Kit, Heterogenous Soils up to 5M

Ergonomic Auger Set for heterogeneous soils. Includes 4 types of Dutch augers (clay-, sand-, coarse sand and combination type), Bucket auger, a stony soil auger, a spiral auger and a gouge auger. Bayonet connection, for sampling up to 5 meters depth. In aluminum transport case.

Clay Soil Auger, Dutch Style, Bayonet 10cm

Clay Soil Auger, Dutch Style, Bayonet 10cm

Single Soil Auger, Dutch Style, for Clay Soils, 10 cm diameter, Bayonet Connection. Handle not included.

Borehole Prep kit

Borehole Prep kit

Complete Kit for creating a borehole down to 10 ft. (3 m) for the Guelph Perimeter. Kit includes: 6 cm Dutch Auger, 6 cm Loam Auger, Auger Handle with Bayonet Connection, Extension Rod (30 cm), Coupling Sleeve, 6 cm Well Prep Brush, all in a convenient carrying bag.

Auger Kit, Heterogeneous Soils Conical, up to 5M

Auger Kit, Heterogeneous Soils Conical, up to 5M

Auger set for heterogeneous soils. Includes 4 types of Dutch augers (clay-, sand-, coarse sand and combination type), Bucket auger, a stony soil auger, a spiral auger, a piston sampler and a gouge auger. Conical Thread Connection, for sampling up to 5 meters depth. In aluminum transport case.

Auger Kit, Heterogeneous Soils Bayonet, up to 5M

Auger Kit, Heterogeneous Soils Bayonet, up to 5M

Auger set for heterogeneous soils. Includes 4 types of Dutch augers (clay-, sand-, coarse sand and combination type), Bucket auger, a stony soil auger, a spiral auger, a piston sampler and a gouge auger. Bayonet Type Connection, for sampling up to 5 meters depth. In aluminum transport case.

Soil Sampling Tube, 6ft

Soil Sampling Tube, 6ft

6 FT. Sampling tube constructed to produce continuous core sample. Complete with tough point and sturdy end cap. Sampling Tube produces a smooth-walled hole, 1-1/4" (3.2 cm) in diameter, while extracting a soil sample 3/4" (1.9 cm) in diameter. The optional drop hammer is used to help insert the sampler into the soil, and to remove the sampler and extract a soil sample. An optional Puller Jack, Model 0220, is available to aid in removing the sampler from the soil.

Soil Coil Sampler 2 1/4in

Soil Coil Sampler 2 1/4in

The 0200 Soil Core Sampler allows the extraction of intact soil cores. This is a "undisturbed" type soil sampler. A core 2-1/4" (5.7 cm) in diameter is extracted and held in a brass cylinder. The cylinder and soil sample can then be placed in a pressure plate extractor or Tempe cell apparatus, and the water-holding characteristics of the sample can be determined. The cylinder can be used to provide a sample of known volume, allowing the bulk density to be determined.

One Piece Soil Sampler, 3ft Steel Chrome

One Piece Soil Sampler, 3ft Steel Chrome

The NEW Lord Soil Sampler is 38" (0.97 m) in overall length with a 1" (2.5cm) shaft X 1.310" (3.3 cm) handle plus handle grips. The "T" handle assembly is made of rugged and welded aluminum tubing and the one foot sample inspection and removal portion, which is now replaceable, is made of tough chrome molly tubing with a black oxide finish. The replaceable cutting tip is made of unfinished but heat treated stainless steel. The unit is also marked in 6" (15.2cm) increments to assure you are at the desired depth while sampling.

Pages